CP3 channel penstock
3-sided sealing

The CP3 channel penstock is the solution for all applications in open channels. The seal is pre-tensioned and thus enables pressure to be absorbed from both sides. The CP3 is suitable for both rectangular and square channels.

More details

Data sheet Tender text

Details

Channel penstock with rectangular opening, 3-sided sealing

Opening dimensions 150 × 150 mm to 1500 × 1500 mm

Pressure level corresponds to the panel height

Variants of this channel penstock: CP3 lowering type channel penstock and CP3 stop gate

Materials

Frame and plate: Stainless steel 1.4301 (304) / 1.4404 (316L)
Spindle: Stainless steel 1.4301 (304) / 1.4404 (316L)
Spindle nut: Seawater resistent bronze (GC-CuSn 12) / Red brass RG7
Seal: EPDM (resistant to waste water and UV) / NBR (oil-resistent)

Other materials available on request.

Leak tightness class

Leak rate better than DIN EN 19569, Part 4, Table 1:
- Pressure on front side: max. 1 % of 0.05 to 0.1 l · s^-1 · m^-1 (leak tightness class 3)
- Pressure on rear side: max. 5 % of 0.05 to 0.1 l · s^-1 · m^-1 (leak tightness class 3)

Actuation options

Stainless steel handwheel with direct mounting or with Modular Actuation System MAS
Lateral actuation with stainless steel gearbox with stainless steel handwheel or stainless steel crank handle
Stainless steel operating key All-in-one via square cap
MOBITORQ mobile actuators (electric or battery-powered) via square cap with Modular Actuation System MAS
BEAmax stainless steel electric rotary actuator for open-close & modulating duty with direct mounting or with Modular Actuation System MAS, optional with stainless steel weather protection roof
Electric actuator with direct mounting or with Modular Actuation System MAS
Pneumatic actuator/Hydraulic actuator with direct mounting or with Modular Actuation System MAS

All actuator options available as a complete package.

Individual sizes are possible at any time on request.

YOUR ADVANTAGES

IMMEDIATELY READY FOR USE

Channel penstock is delivered ready for installation

SPINDLE VERSION

Available with or without spindle (stem pipe)

FOREVER DURABLE SEAL
Through vulcanised BÜSCH UNO angle joints

PERFECT CORROSION PROTECTION

All welded stainless steel parts from our own pickling plant

OPTIONAL EX-PROTECTION
On request, the penstock can be proven to comply with the ATEX Directive 2014/34/EU

We will be pleased to consult you.

Contact

Accessory

Bar screen

Individually manufactured protection for penstocks and pumps or as coarse cleaning in the sewage treatment plant/sluice

Bevel gearbox

For reducing the actuating forces on penstocks, for power transmission and for power distribution when actuating double-spindle penstocks - made of stainless steel