CP3 weir type channel penstock
3-sided sealing

The CP3 weir type channel penstock is ideally suited for water level control in channels. This is made possible by opening the gate from the top downwards. The pre-tensioned seal of the CP3 weir type channel penstock guarantees optimum tightness, both with pressure in or against the direction of the seal.

More details

Data sheet Tender text

Details

Stainless steel weir type channel penstock with rectangular opening, 3-sided sealing

Opening dimensions 150 × 150 mm to 1500 × 1500 mm

Pressure level corresponds to the panel height

Materials

Frame and plate: stainless steel 1.4301 (SS304) / 1.4404 (SS316L)
Seal: EPDM (wastewater- and UV-resistant) or NBR
Spindle: stainless steel 1.4301 (SS304) / 1.4404 (SS316L)
Spindle nut: GC-CuSn 12, seawater resistant bronze

Other materials available on request.

Leak tightness class

Leak rate better than DIN EN 19569, Part 4, Table 1:
- Pressure on front side: max. 1 % from 0.05 bis 0.1 l · s^-1 · m^-1 (leak tightness class 3)
- Pressure on rear side: max. 5 % from 0.05 bis 0.1 l · s^-1 · m^-1 (leak tightness class 3)

Actuation of the penstock by:

Stainless steel hand wheel on transverse yoke
Lateral actuation with gearbox with BÜSCH stainless steel bevel gearbox with stainless steel hand wheel or stainless steel crank handle
BÜSCH all-in-one control key via square cap
BÜSCH MOBITORQ mobile electric actuator via square cap
BEA^© stainless steel electric actuators assembled on transverse yoke, optional with BÜSCH weather protection roof
Pneumatic actuator assembled on transverse yoke
Hydraulic actuator assembled on transverse yoke
E-Actuator

All actuator options available as a complete package.

Individual sizes are possible at any time on request.

YOUR ADVANTAGES

IMMEDIATELY READY FOR USE

Channel penstock is delivered ready for installation

SPINDLE VERSION

Available with or without spindle (push- and pull-rod)

LASTS FOREVER

Only one seal, seal connection BÜSCH UNO-welded

PERFECT CORROSION PROTECTION

All welded stainless steel parts from our own pickling plant

OPTIONAL EX-PROTECTION
On request, the penstock can be proven to comply with the ATEX Directive 2014/34/EU

SPECIAL FEATURES

LOWERING TYPE SYSTEM

Optimum water level regulation

We will be pleased to consult you.

Contact

Accessory

Bar screen

Individually manufactured protection for penstocks and pumps or as coarse cleaning in the sewage treatment plant/sluice

Bevel gearbox

For reducing the actuating forces on penstocks, for power transmission and for power distribution when actuating double-spindle penstocks - made of stainless steel