XL3 weir type channel penstock

weir type channel penstock

XL3 weir type channel penstock

XL3 weir type channel penstock
weir type channel penstock

Due to its frame-mounted seal, the XL3 weir type channel penstock guarantees a consistently good seal, regardless of water pressure. Weir type channel penstocks open by moving the slide plate downwards. The medium flows over the slide plate during opening and in the open state. This makes the XL3 weir type channel penstock ideally suited for water level control in large channels.

More details

Data sheet Tender text

Details

Weir type channel penstock, 3-sided sealing

Opening dimensions 150 × 150 mm to 4000 × 2500 mm

Pressure level corresponds to the panel height

Materials

Frame and plate: Stainless steel 1.4301 (304) / 1.4404 (316L) / 1.4410 (A182 F53) / 1.4462 (A182 F51) / Steel 1.0038 (S235JR/A36) hot-dip galvanised or epoxy coated
Spindle: Stainless steel 1.4301 (304) / 1.4404 (316L) / 1.4410 (A182 F53) / 1.4462 (A182 F51) / 1.4057 (431)
Spindle nut: Seawater resistent bronze (GC-CuSn 12) / Red brass RG7
Seal: EPDM (resistant to waste water and UV) / NBR (oil-resistent)

Other materials available on request.

Leak tightness class

Leak rate better than DIN EN 19569, Part 4, Table 1:
- Pressure on front side: max. 1 % of 0.05 to 0.1 l · s^-1 · m^-1 (leak tightness class 3)
- Pressure on rear side: max. 5 % of 0.1 to 0.3 l · s^-1 · m^-1 (leak tightness class 2)

Actuation options

Stainless steel handwheel with direct mounting or with Modular Actuation System MAS
Lateral actuation with stainless steel gearbox with stainless steel handwheel or stainless steel crank handle
Stainless steel operating key All-in-one via square cap
MOBITORQ mobile actuators (electric or battery-powered) via square cap with Modular Actuation System MAS
BEAmax stainless steel electric rotary actuator for open-close & modulating duty with direct mounting or with Modular Actuation System MAS, optional with stainless steel weather protection roof
Electric actuator with direct mounting or with Modular Actuation System MAS
Pneumatic actuator/Hydraulic actuator with direct mounting or with Modular Actuation System MAS

All actuator options available as a complete package.

Individual sizes are possible at any time on request.

YOUR ADVANTAGES

READY FOR IMMEDIATE USE

The penstock is delivered ready for assembly (up to 1200 mm)

FOREVER DURABLE SEAL
Through vulcanised BÜSCH UNO angle joints

SEAL IN THE FRAME

Good control properties, tight in intermediate position

PERFECT CORROSION PROTECTION

All welded stainless steel parts from our own pickling plant

OPTIONAL EX-PROTECTION
On request, the penstock can be proven to comply with the ATEX Directive 2014/34/EU

We will be pleased to consult you.

Contact

Accessory

Bar screen

Individually manufactured protection for penstocks and pumps or as coarse cleaning in the sewage treatment plant/sluice

Bevel gearbox

For reducing the actuating forces on penstocks, for power transmission and for power distribution when actuating double-spindle penstocks - made of stainless steel

Stem bearing for actuators

As axial bearing for mechanical connection of penstock stem and actuator

Set of square stem cap Doctor Valve

Tool case with complete set of square stem caps for actuation of all common valves

Lock system for square stem caps

Secure and easy-to-fit closure cap for square stem caps

Actuators and Mobile actuators

Electric, battery and solar-powered actuators for various fields of application

XL3 weir type channel penstock
weir type channel penstock

XL3 weir type channel penstock
weir type channel penstock