CP4 semicircular
Semicircular penstock


CP4 semicircular
Semicircular penstock

Both the semicircular bottom and the high sealing quality make the semicircular CP4-RS the ideal fitting for use in DIN chambers. It is suitable for retrofitting in manholes, an existing channel or for the construction of a new channel.

CP4 semicircular – Semicircular penstock

Details

Stainless steel penstock with semicircular opening, 4-sided sealing

Opening size 150 × 150 mm to 1200 × 1200 mm
  • Pressure stage on the front side: 4 mwc
  • Pressure stage on the rear side: 4 mwc
 

Materials

  • Frame and panel: stainless steel 1.4301 (SS304) / 1.4571 (SS316Ti)
  • Seal: EPDM (wastewater- and UV-resistant) or NBR
  • Spindle: stainless steel 1.4301 (SS304) / 1.4571 (SS316Ti)
  • Spindle nut: GC-CuSn 12, seawater resistant bronze
  • anchor rods: stainless steel 1.4571 (SS316Ti)

Other materials available on request.

 

Leak tightness class

  • Leak rate better than DIN EN 19569, Part 4, Table 1:
    • Pressure on front side: max. 1 % from 0.02 bis 0.05 l · s-1 · m-1 (leak tightness class 4)
    • Pressure on rear side: max. 5 % from 0.02 bis 0.05 l · s-1 · m-1 (leak tightness class 4)

 

Actuation of the penstock by:

  • Stainless steel handwheel on transverse yoke
  • Lateral actuation with gearbox with BÜSCH stainless steel bevel gearbox with stainless steel handwheel or stainless steel crank handle
  • BÜSCH all-in-one control key via square cap
  • BÜSCH MOBITORQ mobile electric actuator via square cap
  • BEAservo stainless steel electric actuator assembled on transverse yoke, optional with BÜSCH weather protection roof
  • Pneumatic actuator assembled on transverse yoke
  • Hydraulic actuator assembled on transverse yoke
All actuator options available as a complete package.
Individual sizes are possible at any time on request.

Please contact our customer service via contact form.

ABWASSERHOCHWASSER

YOUR ADVANTAGES

IMMEDIATELY TIGHT
Full sealing performance independent of water level due to pre-tensioned seal
 
NARROW CONSTRUCTION

Usable in narrow shafts

NO SPRAY EFFECT
Clear control behaviour
 
LARGER DENSITY LINE

Ideal for rough construction openings

PERFECT CORROSION PROTECTION

All welded stainless steel parts from our own pickling plant

EX-PROTECTION

Proven to comply with ATEX directive 2014/35/EU

 

SPECIAL FEATURES

SEMICIRCULAR BOTTOM

Ideal penstock for DIN channels

VARIABLE INSTALLATION OPTIONS
Retrofitting in manholes, in an existing channel or for new sewer construction

We will be pleased to consult you

Contact

Accessory

Bar screen

Bar screen

Individually manufactured protection for penstocks and pumps or as coarse cleaning in the sewage treatment plant/sluice

Bevel gear box

Bevel gear box

For reducing the actuating forces on penstocks, for power transmission and for power distribution when actuating double-spindle penstocks - made of stainless steel

Stem bearing for actuators

Stem bearing for actuators

As axial bearing for mechanical connection of penstock stem and actuator

Position indicators

Position indicators

Mechanical and electrical position indicator for indicating the valve position or pipe monitoring

Doctor Valve

Doctor Valve

Tool case with complete set of stem square caps for actuation of all common valves

Lock system for stem square caps

Lock system for stem square caps

Secure and easy-to-fit closure cap for stem square caps

Modular Actuation System MAS

Modular Actuation System MAS

Choose from our wide range of accessories for valve and penstock actuation

Actuators

Actuators

Electric, battery and solar-powered actuators for various fields of application

Similar products

CP4

CP4

Penstock with rectangular opening, 4-sided sealing

CP4 lowering type

CP4 lowering type

Lowering type penstock, 4-sided sealing

We will be pleased to consult you