XL4 weir type penstock
4-sided sealing


XL4 weir type penstock
4-sided sealing

The XL4 weir type penstock, like the other penstocks in this range, offers high sealing performance. Since the seal is located in the gate frame, the XL4 weir type penstock offers good metering characteristics. It is reliably tight on both sides even in intermediate positions.
 

XL4 weir type penstock – 4-sided sealing

Details

Stainless steel weir type penstock with rectangular opening, 4-sided sealing

Opening dimensions 200 × 200 mm to 4000 × 2500 mm
  • Selectable pressure level on both sides: 2-6 mwc
 

Materials

  • Frame and plate: stainless steel 1.4301 (SS304) / 1.4404 (SS316L) / 1.4410 (A182 F53) / 1.4462 (A182 F51) / 1.4539 (904L) / 1.0038-Feuerverzinkt (A36-hot-dip galvanized)
  • Seal: EPDM (wastewater- and UV-resistant) or NBR
  • Spindle: stainless steel 1.4301 (SS304) / 1.4404 (SS316L) / 1.4410 (A182 F53) / 1.4462 (A182 F51) / 1.4539 (904L) / 1.0038-Feuerverzinkt (A36-hot-dip galvanized)
  • Spindle nut: GC-CuSn 12, seawater resistant bronze
Other materials available on request.
 
 

Leak tightness class

  • Leak rate better than DIN EN 19569, Part 4, Table 1:
    • Pressure on front side: max. 1 % from 0.02 to 0.05 l · s-1 · m-1 (leak tightness class 4)
    • Pressure on rear side: max. 5 % from 0.02 bis 0.1 l · s-1 · m-1 (leak tightness class 3)

 

Actuation of the penstock by:

  • Stainless steel hand wheel on transverse yoke
  • Lateral actuation with gearbox with BÜSCH stainless steel bevel gearbox with stainless steel hand wheel or stainless steel crank handle
  • BÜSCH all-in-one control key via square cap
  • BÜSCH MOBITORQ mobile electric actuator via square cap
  • BEA© stainless steel electric actuators assembled on transverse yoke, optional with BÜSCH weather protection roof
  • Pneumatic actuator assembled on transverse yoke
  • Hydraulic actuator assembled on transverse yoke
  • E-Actuator
All actuator options available as a complete package.
 
Individual sizes are possible at any time on request.

Sewage disposalFlood protection

YOUR ADVANTAGES

READY FOR IMMEDIATE USE
The penstock is delivered ready for assembly (up to 1200 mm)
 
SEAL IN FRAME
Clear control options, seal is on both sides completely in place even in the intermediate position
 
PERFECT CORROSION PROTECTION

All welded stainless steel parts from our own pickling plant

OPTIONAL EX-PROTECTION
On request, the penstock can be proven to comply with the ATEX Directive 2014/34/EU

 

SPECIAL FEATURES

WEIR TYPE PENSTOCK
Slide plate can be lowered for optimum water level regulation

We will be pleased to consult you.

Contact

Accessory

Bar screen

Bar screen

Individually manufactured protection for penstocks and pumps or as coarse cleaning in the sewage treatment plant/sluice

Bevel gearbox

Bevel gearbox

For reducing the actuating forces on penstocks, for power transmission and for power distribution when actuating double-spindle penstocks - made of stainless steel

Stem bearing for actuators

Stem bearing for actuators

As axial bearing for mechanical connection of penstock stem and actuator

Doctor Valve

Doctor Valve

Tool case with complete set of stem square caps for actuation of all common valves

Revolution counters & position indicators

Revolution counters & position indicators

Mechanical and electrical position indicator for indicating the valve position or pipe monitoring

Lock system for stem square caps

Lock system for stem square caps

Secure and easy-to-fit closure cap for stem square caps

Actuators and Mobile actuators

Actuators and Mobile actuators

Electric, battery and solar-powered actuators for various fields of application

Similar products

XL4 penstock

XL4 penstock

Large penstock with rectangular opening, 4-sided sealing

XL4 semicircular penstock

XL4 semicircular penstock

Large penstock with semicircular opening, 4-sided sealing

We will be pleased to consult you.