Dismantling joints
made of stainless steel


Dismantling joints
made of stainless steel

When valves or pumps are mounted or dismounted in piping systems, they rarely fit straight away. This is where dismantling joints come into play and provide the necessary length compensation. Depending on what is needed, the types BF2, BF3 and BF4 with the bore patterns PN 10 and PN 16 are in stock as standard. Special sizes or lengths can be custom-made on request.

Dismantling joints – made of stainless steel

Details

Type

  • BF2 (continuous threaded rod)
  • BF3 (continuous threaded rod)
  • BF4 (one-sided continuous threaded rod)

Drilling pattern

  • PN 10
  • PN 16

Size

  • DN 50-400 (BF2)
  • DN 50-1200 (BF3, BF4)

Sealing performance

  • Operating pressure 10 or rather 16 bar
  • Reduced operating pressure with reduced flange thickness

Material

  • Flange and pipe parts
    • Stainless steel 1.4571 (316Ti)
  • Threaded rods
    • Stainless steel 1.4301 (304)
  • Washers and Nuts
    • Stainless steel 1.4571 (316Ti)

The stainless steel parts can be selected in other combinations depending on the area of application.

  • Seal
    • EPDM
    • EPDM for drinking water
    • NBR

Flange

  • Flange geometry on both sides according to DIN 1092-1: 2008 (standard version)
  • Flange connection according to DIN 2576 with reduced material thickness (variant)

Threaded rods

  • in every hole
  • in every other hole

Individual sizes are available on request.
Please contact our customer service via the contact form.

ABWASSERENERGIEWASSER

YOUR ADVANTAGES

FAST AND EASY ASSEMBLY
Because of DIN-performance
 
MATERIAL SELECTION
Depending on the area of application (e.g. drinking water area, strongly corrosive ambient environment), material adjustments are possible
 
PERFECT CORROSION PROTECTION
All welded stainless steel parts from our own pickling plant

We will be pleased to consult you

Contact

Similar products

Dismantling joints epoxy coated steel

Dismantling joints epoxy coated steel

Made of epoxy coated steel - For mounting and dismounting valves or pumps with low length compensation in pipelines

Wall ducts

Wall ducts

Wall ducts for embedding, with puddle flange, as FF- or F-piece

We will be pleased to consult you