Bevel gear box
made of stainless steel


Bevel gear box
made of stainless steel

Bevel gearboxes are used to reduce the actuating forces on penstocks, for power transmission and for power distribution when actuating two-spindle penstocks. The standard delivery is with increased degree of protection IP68++ - this means protection against flooding up to 8 m head of water for a maximum of 30 days with 10 actuations. The housing is made entirely of stainless steel and powder-coated for maximum corrosion protection. An ATEX version is available in size F10. This makes it ideal for use in aggressive environmental conditions such as in sewage treatment plants or the chemical industry.

Bevel gear box – made of stainless steel

Details

BÜSCH bevel gear box are only available in connection with BÜSCH products.

You will find the following values on our data sheet

  • Driving torque
  • Reduction gear ratio
  • Input torque
  • Factor
  • Hand wheel Ø max.
  • Fitting gear
  • Weight allowance at gear

You will find the following drawings on our data sheet

  • External dimensions F10, F14
  • Connection type standard F10, F14
    • Connection type B1 (scope of delivery))
  • Connection types accessories F10, F14
    • Connection type B3 sockets
    • Connection type A suitable for axial forces
ABWASSERENERGIEHOCHWASSER

ACCESSORIES

  • E-actuator driving flange (F10/F14)
  • Hand wheel aluminium/stainless steel with ball joint (DN 200/DN 300/DN 400/DN 500)
  • Handwheel lockable on request

We will be pleased to consult you

Contact

Technical specifications

 

F10

F14

Type of gearbox Bevel gearbox/Angular gear
Mounting position any position
Temperature range -40 to +80 °C
Degree of protection of
enclosure
IP68++ up to 8 m water column (max. 30 days watertight*)
Corrosion protection Housing: 1.4404 (316L)
Hollow shaft: 1.4301 (304) or 1.4571 (316Ti)
Drive shaft: 1.4057 (431)
Housing: 1.4404 (316L)
Hollow shaft: 1.4057 (431)
Drive shaft: 1.4057 (431)
Direction of rotation Clockwise rotation at the input shaft results in clockwise rotation at the output
Model For rising or non-rising spindle
Covering Standard: powder-coated,
ATEX: Housing uncoated, cover A4
Standard: powder-coated,
optional: uncoated
Colour BÜSCH orange (RAL 2004)
Weight 9.8 kg 21.5 kg
Connection input

F10 according to EN ISO 5210
suitable for motor and manual actuation
by handwheel/crank

Standard cylindrical Ø 20 mm
with fitting key according to DIN 6885.1

F10/F14 according to EN ISO 5210

Standard cylindrical Ø 30 mm with
fitting key according to DIN 6885.1

Connection
output
B1 B1 (Ø 42 mm, with fitting key 12 mm) standard B1 (Ø 60 mm, with fitting key 18 mm) standard
Bx Connector with square 25.7 mm
Form A For screw socket Ø max. 40 mm,
for axial force max. 70 kN
For screw socket Ø max. 60 mm,
for axial force max. 160 kN
Further connections and sockets available on request
Reduction gear ratio i = 1:1 or 2:1 i = 2:1, i = 2,8:1 or i = 4:1

*see operating instructions

Downloads

Accessory

Channel flap

Channel flap

Center-mounted flap for three-way sealing applications in channels and flumes.

CP3 channel penstock

CP3 channel penstock

Channel penstock with rectangular opening, 3-sided sealing

CP3 lowering type channel penstock

CP3 lowering type channel penstock

Lowering type channel penstock with rectangular opening, 3-sided sealing

CP4

CP4

Penstock with rectangular opening, 4-sided sealing

CP4 lowering type

CP4 lowering type

Lowering type penstock, 4-sided sealing

CP4 semicircular

CP4 semicircular

Penstock with semicircular opening, 4-sided sealing

SAFOX<sup>®</sup>

SAFOX®

Penstock with circular opening, sealing on all sides

SAFOX<sup>®</sup> F

SAFOX® F

Penstock with flange and circular opening, sealing on all sides

SAFOX<sup>®</sup> G

SAFOX® G

Penstock with smooth sole passage and circular opening, sealing on all sides

XL3 channel penstock

XL3 channel penstock

Large penstock with rectangular opening, 3-sided sealing

XL3 lowering type channel penstock

XL3 lowering type channel penstock

Large lowering type channel penstock with rectangular opening, 3-sided sealing

XL4

XL4

Large penstock with rectangular opening, 4-sided sealing

XL4 lowering type penstock

XL4 lowering type penstock

Large lowering type penstock, 4-sided sealing

XL4 semicircular

XL4 semicircular

Large penstock with semicircular opening, 4-sided sealing

XM4 penstock

XM4 penstock

Penstock with rectangular opening, 4-sided sealing

We will be pleased to consult you